RUBIO MONOCOAT CLEANER MZC

Description

Rubio Monocoat Cleaner is used as a cleaner for raw wood surfaces before the application of Rubio Monocoat Oil Plus. It is also used to clean the materials that were used during the application.

Why use a small amount of Rubio Monocoat Cleaner MZC?

The revolutionary technology of Rubio Monocoat Oil Plus uses molecular reactions to ensure that the oil bonds with the wood fibres within 15 seconds. If there is dust on the surface, the oil will bond with the dust. As a result, when spreading the oil with the white pad, a microscopic paste will form on the surface. The oil will have bonded with the dust instead of with the wood fibres.

The cloth should only be slightly damped with Rubio Monocoat Cleaner. In that way the dust will be collected electrostatically.

Instructions

1. Sand and vacuum the surface in the appropriate manner.

2. Clean the surface with Rubio Monocoat Cleaner.

3. Allow the wood to dry till it regains its original aspect. Drying time: 15 minutes to 1 hour, depending on the degree of product that has been used to wet the surface.

Storage

The product can be stored for up to 12 months. Store in dry conditions and in the original packaging.

Consumption

1 litre = +/-75-100m2

When using oil-based products, oil saturated cloths can spontaneously combust and must either be burnt, placed in water or a lid sealed metal container for disposal. Do not leave oil-saturated cloths lying around.

These guidelines are the result of tests and our own experience and are provided in good faith. Since we have no control over individual circumstances, we cannot be held responsible for any damage incurred as a result of incorrect or inappropriate use of said guidelines.