PP Aquamat CFX
0 item(s) in cart
US DollarEuroPound Sterling
Item Qty Price

SubTotal: £0.00
Delivery: £0.00
Tax: £0.00
Total: £0.00
Existing Customer Login
Forgotten your password?
Create Account
We accept payments by

Our Suppliers
John Hogg
European OGD
Fiorio Colori
Town End
Rubio
LJ Specialities
Rarochem
OGD
Top of the page
PP AQUAMAT CFX
 

A specially formulated high quality, aqueous based printing paste for the production of tonal or 'matt discharge' effects on dark dyed materials.
 
Benefits

  • miscible with paste whites.
  • simple to use.
  • good stability and runnability.
  • good all round fastness.
  • relatively soft handle.
  • brilliant deep shades possible.
  • tonal effects possible.
Application
 

ProductPbw 
PP Aquamat CFXUp to 1000 
** Pigment Dispersion80 – 0 
PP Activator AC030820 – 10(optional)
PP Humectant ZXM20 – 10(optional)
TOTAL1000 
 
** The concentration of pigment dispersion depends on the desired shade and effect.
 
Preparation

Simply blend thoroughly under a high speed mixer (preferably without the introduction of air) the PP Aquamat CFX pigment dispersion and auxiliaries as required.
 
 PP Activator AC0308 (or alternatively, low formaldehyde types) can be added if desired to give enhanced wash durability, for example for goods, which require repeated laundering.  
 
The runnability of the system should give optimal performance without further modification, however, dependent upon the customer's application conditions, flow may be improved by an addition of PP Humectant ZXM or Glycerine.
 
To reduce viscosity water may be used up to a maximum of 5%. 
 
To increase viscosity the addition of up to 1 - 2% of PP Thickener PHS may be used, adjusting the pH with Ammonia to pH 8 - 8.5 where necessary.
 
Printing Recommendations

The choice of screen mesh or engraving depth should be selected relative to the desired effect, however, it is advisable to use courser mesh screens and deep engravings in the case of copper rollers.
 
                   eg:     rotary          60 - 80s mesh
                                                135 Penta
                             flat bed        > 42 th/cm
 
Curing

After printing and drying the goods should be given a dry heat curing treatment at 150ºC - 4 minutes to 180ºC - 1 minute.
 
Due to the high binder reactivity of PP Aquamat CFX the shelf life stability may be limited after the addition after the addition of crosslinker.



Home > Pigments > Printing Chemicals > PP Aquamat CFX
Products
£5.00 /Kg Ex.VAT
£180.00 Inc. VAT
More info+ add to cart