PP Suprafast Glitterbinder AD2563
0 item(s) in cart
US DollarEuroPound Sterling
Item Qty Price

SubTotal: £0.00
Delivery: £0.00
Tax: £0.00
Total: £0.00
Existing Customer Login
Forgotten your password?
Create Account
We accept payments by

Our Suppliers
John Hogg
European OGD
Fiorio Colori
Town End
LJ Specialities
Top of the page
A specially formulated high quality, aqueous based printing paste for use with flitter/glitter powders and flakes, glass beads etc.

  • high brilliance of the print is assured.
  • provides optimum film clarity.
  • simple to use.
  • good stability and runnability.
  • good all round fastness.



PP Suprafast Glitter Binder AD2563Up to 1000 
**Flitter/Glitter Pigment200 – 100 
PP Activator AC030830 – 10(optional)
PP Humectant ZXM20 – 10(optional)
** The concentration depends on the desired shade and effect.

Simply blend thoroughly under a high speed mixer (preferably without the introduction of air) the PP Suprafast Glitter Binder AD2563 and the Flitter / Glitter pigment.
PP Activator AC0308 (or alternatively, low formaldehyde types) can be added if desired to give enhanced wash and dry clean durability, for example, for goods which require repeated laundering.  
The runnability of the system should give optimal performance without further modification, however, dependent upon the customer's application conditions, flow may be improved by an addition of PP Humectant ZXM or Glycerine.
To reduce viscosity water may be used up to a maximum of 5%.  It must be added as a final step, after the Flitter/Glitter pigment has been fully mixed.
To increase viscosity the addition of up to 1% of PP Thickener PHS may be used.
Printing Recommendations

The choice of screen mesh or engraving depth should be selected relative to the desired effect and the particle size of the Glitter/Flitter pigment. However, it is advisable to use very course mesh or stencil screens and deep engravings in the case of copper rollers.
Alternatively electrostatic deposition techniques can be used where the PP Suprafast Glitter Binder AD2563 is used as a base adhesive.

After printing and drying the goods should be given a dry heat curing treatment at 150ºC - 4 minutes to 180ºC - 1 minute.
Due to the high binder reactivity of PP Suprafast Glitter Binder AD2563 the shelf life stability may be limited after addition of the Glitter/Flitter pigment and crosslinker.

Home > Pigments > Printing Chemicals > PP Suprafast Glitterbinder AD2563